1 Ampere Surface Mount Negative Three Terminal Voltage Regulators
Features
● Output Voltage: -5 & -12V
● Output current up to 1A
● No external components required
● Internal thermal overload protection
● Internal short-circuit current limiting
● Output transistor safe-area compensation
● Output voltage offered in 4% tolerance
A common ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the Input ripple voltage. XX = these two digits of the type number indicate voltage. * = Cin is required if regulator is located an appreciable distance from power supply filter. ** = Co is not needed for stability; however, it does improve transient response.
Untuk melihat Produk lainnya Klik Disini
Hubungi : Magenta Electronics
Telp : 082177773323
Email : odang@magentaelectronics.com
website : www.magentaelectronics.com
0 komentar:
Posting Komentar